Since 2007 the specialist in professional tooling.
We ship worldwide.
You could not find what you're looking for ?
Send an email to: sales@jvl-europe.com
ENT arbor with ball bearing 8mm-8mmProduct no.: ENT-14005ENT arbor with ball bearing with shank 8 mm and hole 8mm
29.04 €
|
ENT slotting cutter 4mmProduct no.: ENT-13943ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters. Cutting height 4mm . Diameter 50.8 mm
40.54 €
|
|
Titman Rounding over bits R=1Product no.: ROCB1-6
With 6mm shank and radius 1mm
|
Titman Straight bit with replaceable knives (D: 19, L: 30, GL: 72, Shank: 12 mm)Titman Straight bit with replaceable knives
|
Thrust ball bearing F10-18M 10 x 18 x 5,5 mmProduct no.: F10-18MThrust ball bearing F10-18M 10 x 18 x 5,5 mm. designed to support a predominately axial load. |
696A ZZ / MR1660-ZZ Ball bearing 6 x 16 x 5 mmProduct no.: 696A ZZBallbearing 696A ZZ 6 x 16 x 5 mm |
Diamond cutting disc 125 x 1.9 x 22,23 mm Dronco Perfect F3Product no.: dronco-4123510100Diamond cutting disc sintered 125 x 1.9 x 22,23 mm Dronco Perfect F3
9.08 €
|
Reduction sleeves 12 mm - 1/2 inchProduct no.: ENT-21196Reduction sleeves 12 mm - 1/2 inch |
Stark Rabbeting Cutterhead with reversible knives. (Diameter: 125 mm, height: 50 mm, Bore diameter: 30mm, Z: 4+4)
Cutterhead with HW reversible knives and spurs on both sides rebating and edging.
208.73 €
*
|
PANEL RAISING SET WITH THREE PROFILES Stark YS119AZM-30Product no.: YS119AZM-30PANEL RAISING SET WITH THREE PROFILES hole 30 mm |
ARBOR SDS, 5/8-18 W/DRILL 32-152 mmProduct no.: 207630Morse SDS arbor for hole saw 32-152mm / 1-1/4" - 6" |
ENT trimming cutter top ball bearing 12,7 x 25 mmProduct no.: ENT-11653Bottom cutting, suitable for plunge. With 8 mm shank
53.85 €
|
Hinge Mortising Cutter TC 30 mm ENT 13422Product no.: ENT-13422Specifically designed for cutting in hinges, stair treads and the general routing of larger flat bottom areas
49.49 €
|
ARBOR hex, 32-174mm W/DRILL MA45PCT MorseProduct no.: 209263ARBOR hex, 32-174mm W/DRILL MA45PS Morse |
Shipping